Froodl

Rack Impact Sensors: Can Smart Alerts Stop Unreported Damage?

How rack impact sensors flag forklift knocks nobody reports, what they can't detect, where to fit them, and why racking inspections are still needed.

Rack impact sensors target a common warehouse problem: racking damage usually goes unreported for one simple reason, which is that nobody mentions it. A forklift might hit a pallet rack near the end of a shift. If the driver doesn't notice, or doesn't want to get into trouble, the damaged frame may go on holding tonnes of stock until the next inspection, or until it collapses. Unreported rack damage is a hidden cause of racking collapse. So can impact sensors on racks really help?

How Rack Impact Sensors Work

Rack impact sensors are small devices fitted to the uprights or base of a frame. If something hits the rack with more force than a preset level, the sensor triggers an alert. In simpler systems this is a flashing light and/or a sound on the frame. In more advanced systems, an alert is sent to a supervisor or a dashboard, recording where and when the impact happened and how hard it was. This means racking damage is reported whether or not the driver was aware of it.

Useful Insights From Impact Data

When impact sensors are used across a warehouse racking system, you get real-time information on how many impacts happen in each area of the warehouse. You can quickly see which frames are hit most often, which shifts or areas are causing problems, and whether a small bump has turned into a bigger issue. In large racking systems, these insights help with maintenance planning and accountability, and they can show auditors that risk is being properly managed.

Infographic: how rack impact sensors work, what they catch and miss, where to fit them, and why racking inspections are still needed

Limitations of Impact Sensors

Impact sensors only detect impacts. Corrosion, metal fatigue, gradual overloading and out-of-plumb frames can all affect racking without producing a sharp knock, so sensors may not pick them up. Sensors can also miss real impacts, or trigger on harmless ones. While they help identify damage to a frame earlier, they cannot prove a frame is safe. If the sensor dashboard shows little activity, it is a mistake to assume there is nothing wrong with the racking.

Impact Sensors Do Not Replace Regular Inspections

Although impact sensors are a useful addition to industrial racking systems, regular visual inspections by trained staff and expert inspections required by standards must still be carried out. Sensors pick up damage between those checks, and used this way they reduce racking risk. But if impact sensors are sold as a replacement for regular inspections, they can create a false sense of security.

Conclusion

To a large extent, smart racking monitoring and alerts do reduce unreported damage. When the racking itself reports impacts, damage is far less likely to be missed than when you rely on a conscientious driver to report it. Unreported damage can be cut significantly if the sensors are placed where impacts actually happen, alerts are built into the inspection routine rather than ignored in an inbox, and regular physical checks continue alongside them. It is important, though, to be realistic about what impact sensors can achieve.

Frequently Asked Questions

How Do Rack Impact Sensors Work?

Impact sensors are fitted to the uprights or bases of frames. If an impact exceeds the preset force level, the sensor activates and raises an alert, either as a flashing light and/or sound on the rack or, in a connected system, as a message to supervisors and/or a dashboard. Where and when the impact happened, and how hard it was, is recorded. This means impacts are reported even if nobody noticed them.

Are Impact Sensors a Replacement for Regular Racking Inspections?

No. Impact sensors only detect impact damage, and many types of racking damage happen without a sharp impact, such as corrosion, metal fatigue, overloading and out-of-plumb frames. Sensors may also miss real impacts or raise alerts for harmless ones. Regular visual checks by trained staff and regular expert inspections must still be carried out as standards require. Impact sensors complement these checks by picking up impacts in between; they should not replace proper inspection.

Where Are the Best Places to Fit Impact Sensors?

On the frames that take the most impacts. These are usually at the start and end of aisles, corners, drive-in and drive-through areas, picking faces and loading and unloading areas, because they see the most forklift movements. Narrow aisles are also good candidates, as there is very little room for error. Fitting sensors in high-impact areas only, rather than on every frame, targets the places where unreported impacts are most likely and most damaging.

Cover photo: AFINIS Group on Unsplash.

0 comments

Log in to leave a comment.

Be the first to comment.