When Should You Replace a Paint Roller Cover Instead of Reusing It?
Painting can be quite a job, but that doesn't mean every part of the process is going to be easy. You might be able to keep your roller frame in good shape for a long time, while your roller cover will wear out after just a couple of jobs. If you can reuse your roller covers, you'll definitely save some money, but if you try to extend the life of your roller covers too far, the trouble you're going to cause far outweighs the savings. Uneven paint jobs, loose fibers, scratches, and wasted time, just to start. The truth is, cleaning your roller covers is very important, but there is a limit to how much you can prolong the life of a roller cover. So, how do you know when you have a cover that's worth keeping and when you're better off getting a new one? By looking for a few key indicators, you'll know for sure!
Inspect the Roller Cover for Any Visible Damages
Look at the condition of the roller cover. This may seem too simple to mention, but it's all too easy to miss small damage because the cover still fits on the frame. Examine the fabric or synthetic nap for flattened spots, bald patches, loose threads, or uneven areas. These issues will have an impact on how the paint is picked up and how well it's applied to the wall. If the roller cover is noticeably thinner on one side than the other, the roller won't provide you with a smooth finish. You may be able to use it on a rough exterior wall, but that's not the same thing as using it on a smooth wall inside a room. It is worth throwing out a roller with a damaged cover, as it could take longer to correct the work than it would to simply buy a new one.
When the Old Paint Just Won't Come Off While Washing
If you plan to reuse the roller cover, it should be washed after each use. It will usually wash up fairly well, but it won't always be 100% of the old paint, especially if it's now drying inside the fibers. For water-based paint, this is generally easier to wash out with water and other cleaning methods, but for oil-based materials, you need the right solvent and the proper way to use it. If the cover still feels stiff after washing or if the dried paint on the nap's ridge area becomes hard, expect the cover to leave lines in the new coat. Not only that, but it can drag the old paint into the new layer. If you see that stubborn build-up that refuses to wash out, it's probably easier to buy a new cover.
Watch for Fibers That Loosen and Fall Apart
Loose fibers are a very obvious sign of impending doom. Yes, a brand new roller cover will shed a few loose fibers as you run it over a wall or ceiling for the first time, but anything beyond that is abnormal. An older cover starts to shed loose fibers more readily and those fibers cling to freshly-painted walls and floors. They are stubborn to remove when paint is still wet and almost impossible when the paint has dried. You'll also start to notice banding in your paint where those fibers have shed. That is another indicator that the roller is disintegrating. Before any big job, run your hand lightly over your roller cover and look for loose material; if it's shedding constantly, toss the roller.
Take into account the Style of Paint You Used
Not all paints are created equal when it comes to how they will treat a roller cover. You can generally expect a standard latex paint to be fairly easy to wash and to be able to reuse a higher quality cover several times. Thick primer, textured finishes, stain and specialty products are typically rough on the material. Epoxy paint is another story. You can typically expect it to be difficult to remove once it begins to cure and the residual in the fibers can harden even after thorough washing. If you painted over a coat of primer or the base of a two-part coating without completing the work window to do so, you might want to consider replacing the cover without the wash step.
Don't Ignore Unpleasant Odors or Contamination
Even if a roller cover appears to be OK, there may be an underlying problem if it was stored improperly. Storage moisture may lead to mold growth, while rolled-on paint can leave the cover smelling foul. If you notice an odd smell, see evidence of mold, or find it feels damp when it is removed from storage, do not try to reuse it. Dust, oil, and other contaminants can settle on the cover and be pulled off onto a new coat of paint to cause it to have a poor appearance. The roller may be rinsed to remove some of the dirt, but it still will not give you a quality finish and a new roller is a very low-cost solution.
Align the Replacement With Subsequent Projects
The second part of the decision is what to buy. To select a good roller cover, you need to consider the nap length, roller size, and the material. Short naps are effective on smooth surfaces and ceilings, while longer naps are more effective on textured walls because they can get into small holes. Synthetic covers are popular with water-based paints, while some natural-fiber covers work well with oil-based paints. You should choose a cover suitable for special finishes if you will be applying them. Buying the lowest-cost roller might not always be the best choice if you want your paint to go on smoothly and evenly without needing to double-coat it.
Recognize the Signs That a Specialty Roller Cover Is Worn Out
Specialty painting tools deserve some special attention because they can impact on the coating outcome. For instance, an epoxy glide roller cover is manufactured for use in applications where a smooth application and even coverage needs to be maintained. But even a deliberately designed roller has a working life. Hardening epoxy, bent fibers or a misshapen cover can impede the coating application. Don't continue using a cover just because it was more costly than the standard option – examine it after each use and adhere to the manufacturer's guidelines on cleaning and reuse. If the roller no longer turns freely and consistently leaves a good finish, replace it. It can be cheaper to do that than to rework the epoxy afterwards.
Store Reusable Roller Covers the Right Way
Cleaner stores using poor storage practices: We'd all like to get the most out of every roller cover, but it's common to see damage to the fabric that causes us to need a new one. After cleaning, let it dry completely before you put it away. Otherwise, it'll collect dust, grit and musty smells while damp. Likewise, it must be stored in a dust free environment. If you need to take a break part way through a project and are unable to rinse out your roller, follow the paint manufacturer's storage guidelines rather than leaving the roller face-up to dry in the open air. That cover could be perfectly usable a week later, as long as it isn't frayed or clogged, but storage alone won't improve a damaged roller.
Conclusion
It's easy to justify reusing a paint roller cover once it's clean, stored properly, and will provide a smooth coat of paint. No sense chucking a high-quality cover after a few little projects. But don't see any point in keeping one that's leaving bits of fiber behind, collecting crusty bits of paint or otherwise looking worn out. Review its condition before each use, factor in the coating you applied with it and pay attention to any signs of deterioration.
0 comments
Log in to leave a comment.
Be the first to comment.