What Happens to Your Wafer Step by Step on a Modular Line?
A wafer doesn’t travel through a fab like a package through a post office. It’s more like a patient moving between specialists, each one checking, treating or fixing something before the next. Newcomers often skip this picture, then get confused when a quote mentions six different steps. So here’s a plain walk through what the InchFab Line page describes.
Think of this as a map for anyone comparing wafer processing services for the first time. It won’t make you a process engineer overnight, but you’ll know the words people use and which questions to ask, which is honestly half the battle.
Where Does the Wafer Start?
Most flows begin with coating. The page lists a random access coater tool with edge bead removal, backside edge bead removal, develop, pre and post bake and HMDS. In plain words, this is where the wafer gets its thin light sensitive layer, ready for patterning.
Next comes patterning. The line uses maskless lithography, so the pattern gets written without a physical mask for every change. That’s handy when you’re tweaking a design weekly. A mask aligner and a bond aligner also appear on the page, for work that needs layers lined up with care.
How Do They Check the Pattern?
Measurement sits right beside patterning. The page lists a laser confocal cleanroom services tool, a white light interferometer and a reflectometer. These check heights, depths and film thickness, which matters because you don’t want to find a mistake after five more steps. Early checking is cheap, and late checking isn’t.
Picture a team that skips this and discovers a thin film was half the planned thickness. Everything after it was wasted effort. Measuring after key steps isn’t fancy, it’s insurance. When you talk to any provider, ask where checks happen and what the tool actually reports.
What Happens During Etching and Deposition?
Dry etch is where patterns become shapes in the wafer. The page lists DRIE, RIE oxide and RIE nitride, with up to 4 chambers per module. Deposition sits nearby with HDPCVD for oxide, nitride and silicon, also up to 4 chambers. Together they carve away material and build layers back up.
Metal work comes in two flavors. The line has sputter and e beam evaporation for metal deposition, and a 4 tank plating tool for building thicker metal. Choose based on your device: thin conductive films call for one approach, taller structures for another. A good team helps you decide rather than guessing for you.
Where Does Wet Processing Fit?
Wet steps clean, strip and etch. The page lists a multi tank semi automatic acid station and a multi tank semi automatic solvent station, with megasonics for gentle cleaning. It also mentions Marangoni drying or spin rinse drying afterward, so water spots don’t ruin an otherwise good wafer.
None of this is glamorous, but most failed lots trace back to something small like residue or a drying mark. When wafer processing services quote a flow, ask which wet steps are included. A quiet item on the list can hide a lot of careful handling, and it deserves the same respect as the big tools.
Why Do Furnaces and Bonding Matter?
Furnace work covers high temperature steps. The page lists a stack of 2 to 3 tube furnaces for LPCVD, APCVD and annealing, with rapid thermal annealing as an option. Oxidation also appears on the unit process list. These steps grow or settle films, so they affect how stable your device becomes later.
Bonding is the finishing move for many MEMS devices. The page lists aligned wafer bonding by anodic, fusion and thermal compression methods. If your design seals a cavity or joins two wafers, this is your step. For a real overview of wafer processing services across all these modules, the best move is to ask InchFab for a process quote.
How Do These Modules Add up to One Fab?
InchFab describes the modules as parts of one connected system: hardware, processes and tools working together as a unified fabrication platform. The homepage lists three traits, modular, proprietary and scalable. You start with what you need, then expand as research, development or production grows.
That connected idea explains the one fab, one process approach. Instead of borrowing slices of a giant shared line, you get a set of tools arranged around your flow. The Foundry Service page adds that the same platform supports early development and volume production, so you don’t have to switch providers when you grow.
What Should You Take Away?
A wafer run is a chain: coat, pattern, check, etch or deposit, clean, heat, sometimes bond. Each link has its own tools and its own risks. Knowing the chain helps you read a quote without feeling lost, and it makes your questions sharper.
Print the module list, circle the steps your device needs, and bring that to your first call. You’ll sound prepared, and the reply you get will usually be more detailed. That’s a small habit with a surprisingly big payoff when you compare wafer processing services side by side.
FAQs
Does the line use maskless lithography?
Yes. The InchFab Line page lists maskless lithography under patterning and metrology, alongside laser confocal, white light interferometer and reflectometer tools.
What dry etch options are listed?
DRIE, RIE oxide and RIE nitride, with up to 4 chambers per module.
Which bonding methods are mentioned?
Aligned wafer bonding by anodic, fusion and thermal compression methods.
Can the line handle thicker metal layers?
The page lists a 4 tank plating tool, plus sputter and e beam evaporation for metal deposition.
0 comments
Log in to leave a comment.
Be the first to comment.