Wavlink WiFi Extender Setup: Get a Reliable Network

A single device is not enough to create a network on which you can rely to complete your daily internet needs. Along with the router device you can use an extender device to get a buffer free, no WiFi dead zone or weak signal network. An extender device signals from the router device. Amplifier them and re broadcast to the areas where the router is not able to deliver the strong network. This device is widely used by people to strengthen their home or office network. 

Wavlink is one of the top brands offering WiFi extender devices. Wavlink WiFi extender setup is a quick task to perform using the WPS button. On the other side you can configure the device using the web based method. Web based method is a bit time consuming in comparison to WPS method but allows you to make several variations to the network and create a network as per your need. The setup process along with the requirements and other significant details is specified further you can scroll up to read the information.

Wavlink WiFi extender setup needs a few things to pursue using any of the methods. The list of required items is specified underneath. Make sure you have everything before proceeding towards the process:

• Wavlink extender device 
• Wall outlet 
• Power adaptor 
• Client device 
• Host router device with internet 
• Login credentials of host network 

Configuring Wavlink WiFi extender devices using the WPS based set up method is very easy. Before starting the process you have to make sure your router is accepting WPS connections as many of the routers have default settings to not accept WPS based connections. After very fine you can proceed with the following steps 

• Look for a placement to put your device closer to your router device. 
• After placement is decided you have to power it on by connecting it with the power outlet on the wall. 
• Wait for the device to boot up and then initiate with the setup. 
• Press the WPS button on the router device first following which you have to do the same with the extended device. 
• Make sure this button press  process is completed within 2 minutes. 
• Taking the longer time may fail the process and you have to start it again
• The extenders LED will verify that the process is done or not. So after pushing the buttons you have to keep an eye on the extender device. 

Web based wavlink wifi extender setup process is specified underneath that helps you make several customizations to the network. You just have to go with the process as mentioned:

• Look for a placement to put your device closer to your router device. 
• After placement is decided you have to power it on by connecting it with the power outlet on the wall. 
• Wait for the device to boot up and then initiate with the setup. 
• Next choose a client device and connect it with the extender’s network using the standard details or ethernet cable. 
• After the connect you should launch the web cybersufer and reach to the 192.168.10.1 or wifi.wavlink.com
• Once the portal is open you need to login with the default admin username and password. 
• When you get access to the admin dashboard, begin the configuration by changing the admin login details. 
• Thereafter connect the extender with the router’s default network using its SSID and password. 
• Next you need to secure your extenders network by creating a new unique SSID and password for it. 
• Save the changes you have made and let the device apply it. 
• Verify the connection by looking over the device LED. 
• When your device boots up properly again you need to enter the login interface using the new admin account details. 
• Now make changes in the other settings configure parental control, update former, create guest network and other changes. 
• Save the changes and test the network using a smartphone. 

Using a smartphone device you need to test the connection. Connect your smartphone with the extenders network. Thereafter play online videos, browse websites and more to test the network connection speed and coverage. If needed to boost the network performance then you have to relocate it. For relocation the device to an optimal position you need to search a place somewhere midway. Better placement of the extender ensures you get high speed internet and better coverage.

You can complete wavlink wifi extender setup using any of the above specified methods. If you need quick addition of the device to your network then choose the WPS method. On the other hand if you need customizations to the network then choose the web based setup. Your device is ready to use.