Froodl

Orbital Shaker: Things to Know, Important Settings and How to Pick One

A good orbital shaker gives consistency for work that requires gentle, even mixing. Match the orbit and speed to your container. Keep your loads balanced.

Orbital Shaker: Things to Know, Important Settings and How to Pick One

Cells falling to the bottom of a flask, buffers not fully mixing, a stain not evenly distributed across a membrane: all indicators that a sample requires motion. An orbital shaker provides that motion in a smooth circular path and you'll find these in almost every biology, biochemistry and microbiology lab.

What Is an Orbital Shaker?

The orbital shaker is a lab device that has a flat platform that moves in a circular motion on a horizontal plane. It is used to agitate liquids in flasks, test tubes, plates or dishes. Unlike a vortex mixer that spins a tube around violently, it mixes many containers at once, gently. This makes it suitable for cell culture, staining and extraction work where foaming or shearing would damage the sample.

How an Orbital Shaker Works

A motor drives an off-centre weight or cam underneath the platform, causing the tray to travel in a fixed circle. That motion is defined by a pair of numbers. Speed is the number of circles the platform makes in a minute (typically 20 to 500 rpm) and orbit diameter is the width of the circle (typically 3 mm to 50 mm). Plates and tubes are suitable for small orbits with high speed. Erlenmeyer flasks need a liquid swirling up the walls to collect oxygen. So they like a big orbit, but moderate speed. In my experience, the most common reason a culture grows poorly, even when the speed looks fine on paper, is that the orbit size is incorrect.

How to Select the Right Orbital Shaker

Check the maximum load including flasks,clamps, and liquid. Choose the size of the orbit according to the type of your container and the volume, and look for stable speed control at both ends. Make sure that the platform and clamps fit your flasks, tubes or plates securely. Brushless motors are quieter and have a longer lifespan, and only go for an incubated or CO2 version if your cultures really need it.

Errors to Avoid

Do not overfill flasks, as this will cause splashing and poor aeration. For bacterial cultures, liquid should be about 20% of the flask volume. The shaker is placed on a bumpy surface to create walking and vibration. If the load is unbalanced and the motor is run at maximum speed, it can be damaged. Also, clean spills promptly, as salts and media will corrode the platform over time. Many bacterial cultures are run at speeds between 150 and 250 rpm, whereas mammalian suspension cells require much lower speeds. Always follow your protocol.

Conclusion

A good orbital shaker gives consistency for work that requires gentle, even mixing. Match the orbit and speed to your container. Keep your loads balanced. Maintain it with some simple routine care. Do that and it will quietly support your experiments for years to come. 

0 comments

Log in to leave a comment.

Be the first to comment.