Linksys Extender RE7000 Setup: WPS & Web Configuration Guide

Many people often face difficulty with the networking system having a single device to offer signals across a large space. If you are one of those who is bearing weak signal issue or no signal problem in your networking system and looking for a solution then linksys extender device is the best option. Linksys re7000 range extender model is one of the popular models with latest technology to provide high speed internet. You can easily perform Linksys Extender RE7000 Setup. In the further section of this article you will find step by step details on adding the range extender to your home network. 

Prior to moving further over Linksys Extender RE7000 Setup process it is important to install the device. Installation may includes following steps: 

• Unboxing is the first step of installing the device. Take out the router unit from the box and make sure the box has an internet cable along with a user manual for further reference. 
• Now you need to hunt for a placement to plug in the device closer to the router device. 
• Linksys RE7000 is a wall compact device so you don't need a separate place to put the device. 
• You can easily connect it with the wall socket for the placement and turning on its power. 
• As the device turns on you have to wait till the LED turns stable.

After installing the device you can proceed with the setup process by following any of the below specified methods. There are two ways by which you can perform linksys extender RE7000 setup. The first and most simplest method is the WPS method. This is the quickest method by following which you can configure your extender and enjoy high speed internet. But you cannot do customization to the extender network by following this method to add the device to your network. The second method is the web base method by following which you can do several customisations to the network. This method is a time taking process and you have to follow every step very carefully to configure. So without wasting your time further let's begin the steps you need to follow.

WPS

The WPS setup of the range Extender device is very simple. First of all you have to look for the WPS button on your router device and extender device. Next you need to post the button on the router device first following which button on the extended device. Make sure you can complete the process within 2 minutes to avoid failure. After pushing the button on both the devices you have to keep monitoring your extended device WPS LED to verify the connection is done or not. Once the connection is done you can relocate your extended device to a midway and enjoy a better network or range. 

Web Interface

Linksys Extender RE7000 Setup using the web method is also simple but involve a lengthy process as specified below: 

• After installation of the range extender device hardware you need to choose a client device to run the setup page.
• Next you need to connect your client device to the linksys RE7000 network using wired or wireless connection. 
• Wired connection requires an ethernet cable to connect the WAN port and LAN port of the router and extender.
• Wireless method needs the default SSID and password of the range Extender device as specified on its label. You have to collect the information from the label and rush to the wireless settings on your client device to connect.
• As your device is connected to the extenders network you have to open the setup page in a web browser installed in your client device. 
• Use extender.linksys.com web address or standard IP address to reach out the setup page. 
• To enter the dashboard you need to specify the standard details on the screen. 
• After that choose the router's network from the list that appears on the screen of available networks and enter its password for the connection. 
• Later you need to create an SSID for your extenders network along with the password as changing the standard details is necessary to keep it secure. 
• Also you have to change the admin account security name and password. 
• After putting in all the details you have to save the changes by pressing the save button. 
• Relocate the extender device midway to boost the performance.
• 
  

Hope the above said information is valuable for you in respect of Linksys Extender RE7000 Setup. By following any of the above specified methods you can easily configure your extender device. Enjoy high speed internet and stable connection across your space. If you encounter any trouble related to the setup then you need technical help. Connect a technical expert for advice to get a stable network.