Froodl

Ammunition: Glossary of Essential Terms

From Ball Ammunition to Ballistic Coefficients, a practical guide to the language of cartridges, projectiles, and precision manufacturing -By Sanjay Soni, MD of Hughes Precision Manufacturing

What is the difference between a bullet and a cartridge? Is Ball ammunition the same as FMJ? What do the numbers in 7.62×51 mm mean? And what exactly is a ballistic coefficient?
The world of ammunition has a language of its own. Some expressions describe the physical construction of a cartridge. Others refer to its performance, intended application, or the engineering standards behind its manufacture.
This A–Z glossary from Hughes Precision Manufacturing explains commonly encountered ammunition terms in straightforward language.

A

Accuracy: The degree to which shots strike close to the intended point of aim. Accuracy is different from precision, which describes how closely shots group together.
ACP (Automatic Colt Pistol): A designation appearing in several pistol cartridge names, including .45 ACP and .380 ACP.
Ammunition: A general term for cartridges and other munitions intended for use in firearms or weapon systems. In small arms, ammunition commonly consists of a cartridge case, primer, propellant, and projectile.
Ammunition Lot: A batch of ammunition produced under defined manufacturing conditions and identified by a unique lot number for quality control and traceability.
AP (Armor-Piercing): A category of ammunition incorporating projectiles designed for armor penetration, construction, performance, and legal definitions vary by jurisdiction.
APC (Armor-Piercing Capped): An AP round with a softer cap on the nose. The cap keeps the shot from shattering on hardened armor.
APCBC (Armor-Piercing Capped Ballistic Capped): An APC round with an extra thin, streamlined cap that cuts drag. It was common in WWII.
APCR / HVAP (Armor-Piercing Composite Rigid / High-Velocity Armor-Piercing): A light round with a dense core, usually tungsten carbide, that travels faster than standard AP.
APDS (Armor-Piercing Discarding Sabot): A sub-caliber core carried in a sabot that falls away after leaving the barrel, which gives very high velocity.
API (Armor-Piercing Incendiary): Specialized military ammunition combining armor-piercing and incendiary effects.
APEI (Armor-Piercing Explosive Incendiary): A specialized projectile category combining armor-piercing, explosive, and incendiary characteristics.
APEI-T (Armor-Piercing Explosive Incendiary-Tracer): An APEI projectile incorporating a tracer element that makes part of its flight path visible.
APFSDS (Armor-Piercing Fin-Stabilized Discarding Sabot): The main anti-tank round today. A long, thin "dart” penetrator is stabilized by fins instead of spin. Also called a "long-rod penetrator.”

B

Ball Ammunition: A military designation generally used for cartridges containing full-metal-jacket or solid-metal bullets. Ball ammunition does not necessarily contain spherical projectiles.
Ballistic Coefficient (BC): A numerical measure of how effectively a projectile overcomes aerodynamic drag in flight. Within the same drag model, a higher BC generally indicates better retention of velocity.
Ballistics: The scientific study of projectile motion, divided into internal, external, and terminal ballistics.
Barrel Twist Rate: The distance over which rifling completes one full revolution inside a barrel. For example, a 1:10 twist indicates one revolution in ten inches.
Berdan Primer: A centerfire primer system in which the anvil is part of the cartridge case rather than the primer assembly.
Birdshot: A shotgun ammunition category containing numerous relatively small pellets, commonly associated with bird hunting and clay-target shooting.
Blank Cartridge: A cartridge designed to produce a firing report without launching a conventional bullet. Blanks can still cause serious injuries, particularly at close range.
Boat-Tail Bullet (BT): A bullet with a tapered rear section intended to improve aerodynamic efficiency.
Bore: The internal passage of a firearm barrel through which a projectile travels.
Boxer Primer: A centerfire primer with its own internal anvil, widely used in commercial ammunition.
Buckshot: Shotgun ammunition containing relatively large pellets, typically fewer in number than birdshot.
Bullet: The projectile that leaves the firearm barrel when a conventional cartridge is fired. A bullet is only one component of a complete cartridge.
Bullet Drop: The vertical displacement of a projectile under gravity as it travels along its trajectory.
Bullet Jacket: The outer metallic covering surrounding all or part of a bullet's core. Jackets commonly use copper alloys.
Bullet Weight: The mass of a projectile, conventionally expressed in grains (gr).

C

Caliber: A numerical designation associated with a firearm's bore diameter or a cartridge's approximate bullet diameter. It may be expressed in millimeters or inches.
Cannelure: A circumferential groove formed around a bullet or cartridge case. It can serve several functions, including providing a location for a case-mouth crimp.
Cartridge: A complete unit of ammunition ordinarily consisting of a case, primer, propellant, and projectile. Certain cartridges, such as blanks, contain no conventional bullet.
Cartridge Case: The metallic or other container holding the components of a cartridge together.
Cartridge Case Length: The length of a cartridge case, generally measured from its base to its mouth. In cartridge names such as 7.62×51 mm, the second number typically identifies nominal case length.
Cartridge Overall Length (COL/OAL): The measurement from the base of a loaded cartridge to the tip of its bullet.
Case Head: The base of a cartridge case, typically containing the primer in centerfire ammunition and often bearing identification markings.
Case Mouth: The open end of a cartridge case into which a bullet is seated.
Case Neck: The narrower forward section of a bottleneck cartridge case that holds the bullet.
Case Shoulder: The tapered transition between the body and neck of a bottleneck cartridge case.
Centerfire Ammunition: Ammunition with a primer positioned centrally in the cartridge case head.
Chamber: The part of a firearm designed to accommodate the cartridge before firing.
Chamber Pressure: The pressure generated inside the chamber by expanding propellant gases during firing.
Chronograph: An instrument used to measure projectile velocity.
C.I.P.: The Permanent International Commission for the Proof of Small Arms, an international organization establishing technical rules for firearm proof testing and ammunition conformity in participating countries.
Crimp: The deformation of the cartridge case mouth to retain a bullet or close a shotshell.

D

Drag: The aerodynamic resistance encountered by a projectile travelling through air.
Dummy Cartridge: An inert cartridge made for identification, training, testing, or demonstration. It contains no active propellant or functional primer.

E

Expansion: The increase in a projectile's diameter upon impact. Certain hollow-point and soft-point bullets are specifically engineered to expand under defined conditions.
External Ballistics: The study of projectile movement after leaving the firearm's muzzle and before reaching a target.

F

Flash Hole: An opening inside a centerfire cartridge case through which primer ignition reaches the propellant.
Flat Point (FP): A bullet with a flattened nose profile.
FMJ (Full Metal Jacket): A bullet design in which a harder metal jacket surrounds most of the core, generally covering the nose and sides while potentially leaving the base exposed.
Frangible Bullet: A projectile designed to break apart when striking certain hard surfaces, reducing ricochet and splash-back hazards.
Freebore: The unrifled portion of a chamber immediately ahead of the cartridge case mouth, before the projectile engages the rifling.

G

Gauge: A traditional measurement system used to designate shotgun bore size. In the conventional system, a smaller gauge number indicates a larger bore.
Gilding Metal: A copper-based alloy, generally containing zinc, commonly used in bullet jackets.
Grain (gr): A unit of mass used to specify bullet weight and propellant charge weight. It should not be confused with the gram (g).
Group Size: A measurement of the spread between multiple impacts on a target, commonly used to evaluate shooting precision.

H

Headspace: The distance between the closed breech face and the chamber surface that establishes the forward seating position of a cartridge.
Headstamp: Letters, numbers, or symbols stamped on the base of a cartridge case, commonly indicating the manufacturer, cartridge designation, or other identifying information.
HE (High-Explosive): A general-purpose blast and fragmentation round used against infantry, soft vehicles and fortifications.
HE-FRAG: An HE round optimized to produce fragments.
HEAT-MP / MPAT (Multi-Purpose Anti-Tank): A HEAT round that also works against bunkers, light vehicles and helicopters.
HE-MP-T (High-Explosive Multi-Purpose with Tracer): A modern programmable multi-role round, such as the US M830A1 or the newer AMP.
HEAT (High-Explosive Anti-Tank): A shaped-charge round that focuses explosive energy into a high-velocity metal jet. How well it penetrates doesn't depend on how fast it's going.
HESH / HEP (High-Explosive Squash Head / High-Explosive Plastic): A round whose plastic explosive flattens against armor before detonating. The shock wave makes fragments break off the inside face of the armor.
Hollow Point (HP): A bullet design featuring a cavity in its nose. Some hollow-point designs are intended to expand, while others serve different purposes.

I

Illumination (Illum): A round that releases a parachute flare for lighting at night.
Incendiary Ammunition: Specialized ammunition containing a composition intended to produce an incendiary effect.
Internal Ballistics: The study of events occurring inside a firearm during firing, including propellant combustion, pressure development, and projectile acceleration through the barrel.

J

Jacketed Bullet: A projectile with a metallic outer jacket covering some or most of its core.
JHP (Jacketed Hollow Point): A jacketed projectile featuring a hollow cavity at its nose, commonly designed to promote controlled expansion under suitable impact conditions.
JSP (Jacketed Soft Point): A jacketed bullet with an exposed portion of relatively soft-core material at the nose, commonly intended to facilitate expansion.

K

Keyholing: A condition in which a projectile strikes a target sideways or at a substantial angle, producing an elongated or irregular impact hole. It may indicate instability in flight.

L

Lands and Grooves: The raised and recessed surfaces of conventional rifling inside a firearm barrel that impart spin to the projectile.
LRN (Lead Round Nose): A bullet made primarily of lead or lead alloy with a rounded nose profile.
Lot Acceptance Testing: Testing carried out on a production batch of ammunition to determine whether it meets defined acceptance requirements.
Lot Number: A unique identification code assigned to an ammunition production batch to support manufacturing traceability.

M

Magnum: A term used in certain cartridge names, commonly associated with designs offering greater capacity or performance than an established comparison cartridge. The designation alone does not establish a specific performance level.
Match-Grade Ammunition: Ammunition marketed or manufactured for demanding accuracy and consistency requirements. The term does not have one universal specification across all manufacturers.
Maximum Average Pressure (MAP): A pressure limit specified under an applicable ammunition standard for the average results of defined tests.
Metric Cartridge Designation: A naming convention such as 5.56×45 mm or 7.62×51 mm. The first number relates to nominal caliber, while the second generally indicates cartridge case length. These figures do not establish complete cartridge interchangeability.
Minute of Angle (MOA): An angular measurement equal to one-sixtieth of a degree, commonly used to express group size or sight adjustments.
Monolithic Bullet: A bullet manufactured from a single material, such as copper or a copper alloy, rather than a separate jacket and core.
Muzzle Energy: The kinetic energy of a projectile as it leaves the muzzle.
Muzzle Velocity: The speed of a projectile at the moment it exits the firearm's barrel, commonly expressed in meters per second (m/s) or feet per second (fps).

N

NATO Ammunition: Ammunition produced to applicable NATO specifications or designated for NATO service. Not all commercially named cartridges with similar dimensions have identical specifications.
Neck Tension: The holding force exerted by the neck of a cartridge case on a seated bullet.
Non-Corrosive Primer: A primer formulated without the corrosive salt residues associated with certain older priming compositions.

O

Ogive: The curved or tapered nose profile of a bullet, a feature influencing its shape and aerodynamic characteristics.
OTM (Open Tip Match): A match-oriented bullet design featuring a small opening at the nose, generally associated with its jacket-forming construction and precision objectives. It should not automatically be classified as an expanding hollow-point projectile.
Overpressure Ammunition (+P): Ammunition loaded to a higher pressure specification than the corresponding standard-pressure cartridge, where such a standardized designation exists.

P

Penetration: The extent to which a projectile enters or passes through a material after impact.
Practice / TP (Target Practice): An inert or reduced-effect training round. TPDS and TPCSDS are practice sabot rounds.
Precision: The degree to which repeated shots produce closely grouped impact points. A tightly grouped set of shots is precise even if it is not centered on the intended point of aim.
Primer: The ignition component of a cartridge that initiates propellant combustion when activated.
Primer Pocket: The recess in the head of a centerfire cartridge case that houses the primer.
Projectile: An object propelled from a firearm, including bullets, shotgun pellets, and slugs.
Propellant: The energetic material in ammunition that produces rapidly expanding gases to propel a projectile. Modern small-arms ammunition commonly uses smokeless propellant.
Proof Cartridge: A specially specified test cartridge used during firearm proof testing to assess the strength of a firearm or component under prescribed test conditions.

Q

Quality Assurance (QA): The systematic processes used to establish confidence that ammunition manufacturing consistently meets applicable requirements.
Quality Control (QC): The inspection, measurement, and testing activities used to identify whether manufactured ammunition conforms to specified standards.

R

Recoil: The rearward movement or force experienced by a firearm in response to firing a projectile and expelling gases.
Ricochet: The deflection of a projectile after it strikes a surface rather than stopping or penetrating as initially expected.
Rifling: Spiral features inside a firearm barrel that impart rotational motion to a projectile to help stabilize its flight.
Rimfire Ammunition: Ammunition in which the priming composition is located within the cartridge case rim. The .22 Long Rifle is a common example.
Rimmed Cartridge: A cartridge case with a projecting rim extending beyond the diameter of the case body.
Rimless Cartridge: A cartridge case with an extraction groove and a rim that does not substantially project beyond the main case body.
Round: An informal term commonly used to describe one complete cartridge of ammunition.
Round Nose (RN): A projectile with a rounded forward profile.

S

SAAMI (Sporting Arms and Ammunition Manufacturers' Institute): A U.S. industry organization that develops voluntary technical standards covering ammunition and firearms, including dimensional, pressure, and performance specifications.
Sectional Density (SD): A measure relating projectile mass to the square of its diameter. It is one of several factors relevant to projectile behavior.
Semi-Jacketed Hollow Point (SJHP): A bullet with a partial metallic jacket and a hollow-point nose, leaving some core material exposed.
Shot: Small, generally spherical projectiles loaded into shotgun ammunition.
Shot Pattern: The distribution of pellets produced by a shotshell at a specified distance.
Shotshell: A shotgun cartridge containing a load of shot or, in common usage, a single slug.
Shaped charge / Munroe effect: The principle behind HEAT (High Explosive Anti Tank) ammunition. A hollow, lined cavity in the explosive concentrates the blast into a jet.
Standoff: The best distance between the shaped charge and the armor for maximum effect. Probes on the nose of a round often set it.
Spall: Fragments thrown off the inner face of armor when it's hit, which is dangerous to the crew.
Slug: A single large projectile intended for use in a shotgun.
Smokeless Powder: A class of propellants, generally based on nitrocellulose, that produces considerably less visible smoke than traditional black powder.
Smoke / WP (White Phosphorus): Rounds that make obscuring smoke. WP is also incendiary.
Soft Point (SP): A bullet design with an exposed portion of softer material at the nose, often intended to initiate expansion after impact.
Spitzer Bullet: A projectile with a pointed, streamlined nose profile.
Standard Deviation (SD): A statistical measurement of variability. In ammunition testing, it is often used to describe variations in velocity or other measured characteristics across a sample.
Subsonic Ammunition: Ammunition designed to propel its projectile below the local speed of sound under specified conditions.
Supersonic Ammunition: Ammunition whose projectile travels faster than the local speed of sound, typically creating a ballistic shock wave during the supersonic portion of its flight.

T

Tandem charge: Two shaped charges in a row in anti-tank ammunition. The first sets off or clears reactive armor, and the second penetrates the main armor.
Terminal Ballistics: The study of projectile behavior when it impacts and interacts with a target or other material.
Test Barrel: A barrel with defined specifications used in controlled ammunition performance testing.
Tracer Ammunition: Specialized ammunition containing a projectile that produces a visible light trace during part of its flight.
Trajectory: The curved path followed by a projectile as it travels through the air.

V

Velocity: The speed and direction of motion of a projectile. In ammunition specifications, velocity is commonly reported as a scalar speed at a defined measurement point.

W


Wad: A component used in shotgun cartridges to separate the propellant from the shot or slug, provide gas sealing, or support the projectile load.
Wadcutter: A bullet with a flat forward profile designed to produce clean-edged holes in paper targets.
Wind Drift: The displacement of a projectile's flight path caused by wind during its travel.

Y


Yaw: The angular difference between a projectile's longitudinal axis and the direction of its flight.

Z


Zero: The selected aiming reference or sight setting at which the point of aim and the expected point of impact coincide under specified conditions.
Frequently Asked Questions About Ammunition
What is the difference between a bullet and a cartridge?A bullet is the projectile. A cartridge is the complete unit of ammunition, normally comprising the bullet, cartridge case, primer, and propellant.
Are FMJ and Ball ammunition the same?Not exactly. FMJ identifies a bullet's construction. Ball ammunition is a military designation generally associated with cartridges containing FMJ or solid-metal projectiles.
What does 7.62×51 mm mean?It is a metric cartridge designation. The first number relates to the nominal caliber, and the second refers to the nominal cartridge case length in millimeters.
What does grain mean in ammunition?A grain is a unit of mass commonly used to specify bullet weights. It is not a measure of gunpowder grain size.
What is the difference between subsonic and supersonic ammunition?Subsonic ammunition propels a projectile below the local speed of sound. Supersonic ammunition propels it above that threshold, at least initially.
What is the difference between accuracy and precision?Accuracy describes closeness to the intended point of aim. Precision describes how closely repeated shots group together.
Why is ammunition lot testing important?Lot testing helps manufacturers verify that ammunition produced within a specific batch meets defined requirements, including relevant dimensions and ballistic performance characteristics.
Understanding Ammunition Begins with Understanding Its LanguageA few letters or numbers printed on a cartridge box may identify a caliber, reveal a bullet's construction, describe its intended application, or refer to a technical performance characteristic.
Understanding these terms helps readers interpret ammunition specifications more accurately.
At Hughes Precision Manufacturing, ammunition engineering encompasses cartridge design specifications, component consistency, inspection, and ballistic quality verification.
Explore the Hughes Precision Ammunition Range to learn more about the different calibers and ammunition categories in its portfolio.
Definitions are educational summaries; applicable standards and manufacturer specifications govern individual products.
Blog:https://www.hughesprecisionm.com/ammunition-glossary-of-essential-terms-en-us.htm
LinkedIn:https://www.linkedin.com/feed/update/urn:li:activity:7529122501105287168
Instagram:https://www.instagram.com/p/Df61NI0zX52/
X:https://x.com/PrecisionHughes/status/2123359030286721347

0 comments

Log in to leave a comment.

Be the first to comment.