From Setup to Success: Mastering Your Linksys AC1200 Setup

Are you confused about the setting up procedure of your router?

Well, you are not the only one. We all have been there at some point. So, there is nothing to worry about. This blog contains all the details small to big for your convenient router configuration journey. You will be able to install your device most efficiently just by following the steps given ahead. So, read all the information thoroughly and perform the steps accordingly. 

What Is A Router?

A router is a networking device that transfers data packets to various networks and subnetworks. Its two primary functions are managing traffic between data networks by forwarding data packets to their IP addresses and, allowing multiple devices to use the same network. 

Why Do You Need It?

We are living in a digital era where everything is interconnected globally. You can work remotely for another country just by using your mind and a fast and stable internet connection, courtesy of the technology. Technology is evolving at a very fast pace and so is the world. Competition is the only way to get ahead and be recognized. But your vision and everything you do will go in vain if you can not deliver the right work at the right time. Slow internet is equivalent to no internet in this running world and kills creativity and passion. Therefore, routers are used as the solution to all of your internet-related problems. They do not just provide good quality internet but also facilitate convenience in all areas of your life. 

Do’s Before Beginning The Configuration Process

We are living in the smart work era and it always beats hard work. You can begin the configuration process right away but that is the shortcut to a process full of frustration and inefficiency. Therefore, it is important to prepare properly before starting the main procedure.

Unboxing 

First, unbox the package and inspect all the items it contains. The box should contain the router, an adapter, an ethernet cable, a user manual guide, a warranty card, and a support slip. Check all the components carefully and properly. No piece should be damaged in any way. 

Internet Connection 

A stable internet connection is needed to support the Linksys AC1200 setup. Check the quality of the internet by talking to your Internet Service Provider (ISP). Switch to an upgraded plan if you are about to connect many devices. Taking care of this factor ensures the whole process is smooth and complete in no time.

Electricity Supply 

Electricity and other aspects related to it play a vital role in the efficient and effective working of the configuration process and the router as well. So, you are advised to check all the power outlets, wires, ethernet cables, and switches to make sure that the electricity supply does not get interrupted at any point. Ensure all connections are done properly and tightly. The ethernet cable is the most important when it comes to the connections. Although you must have got an ethernet cable from the package. You should keep in mind that the cable should not be damaged in any way. In case, you do not get the ethernet cable with the package, buy a brand new cable and do not use any old one. 

SSID And Password

Keep your SSID and password handy so you do not have to search for them at the login time. Your login credentials will be on the label that must be present at the bottom of your device. Check the user manual guide if the credentials are not given on the label or the label is not present there.

Let’s Configure The Router 

Very few steps are needed to complete the configuration process of the router which are not just simple but can be done in no time if performed attentively. 

Device Connection

This is the first and foremost step to begin the installation procedure. You can do it in three ways.

• Wired Connection - You are going to need an ethernet cable for this method. Take the cable and attach one side to the router and the other to the computer. This is the most effective way that rarely shows error so the connection will be successful unless the cable is damaged.

• Wireless Connection - Plug in the router and switch it on. The LED light will turn on. Now go to the WiFi settings of your system and search for the available devices. Select the name of your router and give it some moments to connect. 

• WPS - This is a button on your router at the back or on the side. WPS will be written under it or two arrows forming a circle will be shown on the button. Press it for a few seconds. Go to the settings of the system you are using and tap WiFi. Search for the SSID of your network and instead of entering the password look for the WPS option. Click on it and your system will be connected to the router.

Login 

Use any browser and type the web or IP address of your router brand in the search window. A setup page will show up. Click on the login option. Enter your SSID and password that you must have collected by now. Tap sign in and the login will be done in a few seconds.

Mobile Login

If you find the above-mentioned method difficult then you can log in via mobile phone. Download the app and click on the login interface. Enter your login credentials and click on Sign in. 

Setting Up The Router 

• Go to the setup page and select your router’s model.

• Enter all the credentials and start customizing the settings.

• Change your username. SSID and password for more security.

• WPA2 encryption should be set up too.

• Click on Done and reboot your device. This allows the new settings to work effectively.